Kitty
11-02-2007, 11:46 AM
Over the years I've used MANY automags, many of them modified - using a variety of parts from different manufacturers.
I've compiled a list (that is far from complete) of Aftermarket Items available for the Automag series markers
Please if you know of other items, post up and I can update this thread.
This List includes Items SPECIFIC To the AGD line of markers - You'll note that I don't list every autococker threaded barrel ever released or every feedneck, detend and ASA/foregrip.
There are rumors that certain AC Barrels do not fit the ULE Bodies Let me address this right here. Autococked used a strange thread (UMF 1 15/16-20 using G7 (+50 micron) TAP for female threads) Early fitment issues forced the switch to a G7 quality because of anno tollerance issues. G5 is perfectly acceptable on non annoed barrel threads/marker threads
So if you have a barrel threaded for autocockers made after 1997 and your markers body was made post '97 - You're fine.
**Items in RED no longer produced or sold**
ANS Reactor on/off valve
ANS Phase II Regulator
ANS Venturi Bolt
AGD ULT on/off valve
AGD Foamie bolt
AGD Delrin Superbolt
ADG L7 Bolt Kit
AGD L10 Bolt Kit
AGD verticle ASA adapter
AGD Back Bottle adapter
AGD Bottom Line kit
AGD Foregrip
AGD Bicycle Grip
Diamond Labs Regulator (8-hole mod)
SmartParts Regulator
SmartParts Magic Box
SmartParts Splash Kit
SmartParts Twist Lock Barrels
TASO:
Rail (pump milled)
Twist Lock Barrels
Taso stopped making bits for the Automag in 2002 and went out of business shortly after
KAPP:
Tourney Lock
Front Grip
Grip extender
trigger/shoe
KAPP Went out of business early 2006
CP:
Twist Lock Barrels
DYE:
Twist Lock Barrels
Deadly wind:
Front grip
Verticle ASA 15*
RPG:
Front 15* ASA
Gas Through Grip
SubZero Feedneck
ReTentz
Vert Warp Adapter
Gripframes:
Booyah Gripframe (electro)
Benchmark Gripframe (single, double)
Centerflag Hyperframe (electro)
Dye single and double
AGD .45 Gripframe
AGD Y Grip
AGD Z Grip
AGD Intelli-Frame
RPG ULE Intelli
RPG Chimira Gripframe (double, 90*)
Logic UMF (90*)
Logic UMF Hybrid (90* that uses .45 grips)
Logic UEF
Triggers:
AGD Pro Blade Trigger
RPG Pro Blade Trigger
RPG 'Double' Trigger
RPG Splinter Pro Trigger
RPG ViperBlade Pro Trigger
Rails:
AGD tac
AGD pump
RPG Shadow
RPG Mini-Shadow
Deadly Wind Dallara
Deadly Wind Karta
Logic Ultra Light
Bodies:
RPG Exile
RPG Pariah
PTP Micromag
AGD ULE (made in both Vert and Warp feed)
AGD Tac WARP
AGD Slug
AGD tac
Deadly Wind Ripper
Deadly Wind Karta
ODDIES:
Benchmark released a "color kit" for the Automag series of markers at the 2001 IAO trade show.
The kit included a milled barrel, rail, front grip, two fingered .45 trigger frame, and a milled drop forward cradel with "apoc" style rail. Also released; colored grips to go along with the ano scheme that came in red, blue, purple (a hot color back then) and chrome.
It is important to note that ALL aftermarket bodies and rails are milled from AGD Factory Made ULE or SLUG bodies and RTP rails. There was one rail that was NOT milled from an AGD Factory rail - that was the benchmark rail. The only non AGD product to be approved not to void the warrenty by Airgun Designs. You know you started with a good product when the companies that make "aftermarket" parts use your originals to start from.
I've compiled a list (that is far from complete) of Aftermarket Items available for the Automag series markers
Please if you know of other items, post up and I can update this thread.
This List includes Items SPECIFIC To the AGD line of markers - You'll note that I don't list every autococker threaded barrel ever released or every feedneck, detend and ASA/foregrip.
There are rumors that certain AC Barrels do not fit the ULE Bodies Let me address this right here. Autococked used a strange thread (UMF 1 15/16-20 using G7 (+50 micron) TAP for female threads) Early fitment issues forced the switch to a G7 quality because of anno tollerance issues. G5 is perfectly acceptable on non annoed barrel threads/marker threads
So if you have a barrel threaded for autocockers made after 1997 and your markers body was made post '97 - You're fine.
**Items in RED no longer produced or sold**
ANS Reactor on/off valve
ANS Phase II Regulator
ANS Venturi Bolt
AGD ULT on/off valve
AGD Foamie bolt
AGD Delrin Superbolt
ADG L7 Bolt Kit
AGD L10 Bolt Kit
AGD verticle ASA adapter
AGD Back Bottle adapter
AGD Bottom Line kit
AGD Foregrip
AGD Bicycle Grip
Diamond Labs Regulator (8-hole mod)
SmartParts Regulator
SmartParts Magic Box
SmartParts Splash Kit
SmartParts Twist Lock Barrels
TASO:
Rail (pump milled)
Twist Lock Barrels
Taso stopped making bits for the Automag in 2002 and went out of business shortly after
KAPP:
Tourney Lock
Front Grip
Grip extender
trigger/shoe
KAPP Went out of business early 2006
CP:
Twist Lock Barrels
DYE:
Twist Lock Barrels
Deadly wind:
Front grip
Verticle ASA 15*
RPG:
Front 15* ASA
Gas Through Grip
SubZero Feedneck
ReTentz
Vert Warp Adapter
Gripframes:
Booyah Gripframe (electro)
Benchmark Gripframe (single, double)
Centerflag Hyperframe (electro)
Dye single and double
AGD .45 Gripframe
AGD Y Grip
AGD Z Grip
AGD Intelli-Frame
RPG ULE Intelli
RPG Chimira Gripframe (double, 90*)
Logic UMF (90*)
Logic UMF Hybrid (90* that uses .45 grips)
Logic UEF
Triggers:
AGD Pro Blade Trigger
RPG Pro Blade Trigger
RPG 'Double' Trigger
RPG Splinter Pro Trigger
RPG ViperBlade Pro Trigger
Rails:
AGD tac
AGD pump
RPG Shadow
RPG Mini-Shadow
Deadly Wind Dallara
Deadly Wind Karta
Logic Ultra Light
Bodies:
RPG Exile
RPG Pariah
PTP Micromag
AGD ULE (made in both Vert and Warp feed)
AGD Tac WARP
AGD Slug
AGD tac
Deadly Wind Ripper
Deadly Wind Karta
ODDIES:
Benchmark released a "color kit" for the Automag series of markers at the 2001 IAO trade show.
The kit included a milled barrel, rail, front grip, two fingered .45 trigger frame, and a milled drop forward cradel with "apoc" style rail. Also released; colored grips to go along with the ano scheme that came in red, blue, purple (a hot color back then) and chrome.
It is important to note that ALL aftermarket bodies and rails are milled from AGD Factory Made ULE or SLUG bodies and RTP rails. There was one rail that was NOT milled from an AGD Factory rail - that was the benchmark rail. The only non AGD product to be approved not to void the warrenty by Airgun Designs. You know you started with a good product when the companies that make "aftermarket" parts use your originals to start from.